• The tip should be cleaned manually using a disinfecting solution. After cleaning and disinfection, inspect the mirror inside the tip to ensure that there are no stains or smudges.
• Repeat the cleaning and disinfection process, if necessary. Carefully dry the mirror using a paper towel.
• Insert the tip into a paper sterilization pouch and seal it, making sure that it is airtight. Use either a self-adhesive or heat-sealed pouch.
• Sterilize the wrapped tip in an autoclave with the following conditions: At 121℃ (249.8°F) for 30 minutes, and 15 minutes drying period
• Use an autoclave program that dries the wrapped tip before opening the autoclave.

The post i500 Scanner Tips appeared first on ISD-Digital.

• The scanner tip should be manually cleaned with a disinfecting solution. After cleaning and disinfecting, check the mirror inside the scanner tip for any stains or smudges.
• If necessary, repeat the cleaning and disinfection process. Using a paper towel, gently dry the mirror.
• Insert the scanner tip into a paper sterilization pouch and seal it tightly to ensure airtightness. Use a heat-sealed or self-adhesive pouch.
• In an autoclave, sterilize the wrapped scanner tip under the following conditions:

At gravity type > Sterilize for 30 minutes at 121℃(249.8℉) and dry for 15 minutes.

At gravity type > Sterilize for 10 minutes at 135℃(275℉) and dry for 30 minutes.

At pre-vacuum type > Sterilize for 4 minutes at 134℃(273.2℉) and dry for 20 minutes.

• Before opening the autoclaves, use an autoclave program that dries the wrapped scanner tip.
• Scanner tips can be re-sterilized up to 150 times before being discarded as directed in the disposal guide.
• Autoclave times and temperatures may differ depending on the type and manufacturer of the autoclave. As a result, it may be unable to meet the maximum number of times. To determine whether the required conditions are met, please consult the user’s manual of the autoclave manufacturer you are using.

The post Small Scanner Tips appeared first on ISD-Digital.

• The scanner tip should be manually cleaned with a disinfecting solution. After cleaning and disinfecting, check the mirror inside the scanner tip for any stains or smudges.
• If necessary, repeat the cleaning and disinfection process. Using a paper towel, gently dry the mirror.
• Insert the scanner tip into a paper sterilization pouch and seal it tightly to ensure airtightness. Use a heat-sealed or self-adhesive pouch.
• In an autoclave, sterilize the wrapped scanner tip under the following conditions:

At gravity type > Sterilize for 30 minutes at 121℃(249.8℉) and dry for 15 minutes.

At gravity type > Sterilize for 10 minutes at 135℃(275℉) and dry for 30 minutes.

At pre-vacuum type > Sterilize for 4 minutes at 134℃(273.2℉) and dry for 20 minutes.

• Before opening the autoclaves, use an autoclave program that dries the wrapped scanner tip.
• Scanner tips can be re-sterilized up to 150 times before being discarded as directed in the disposal guide.
• Autoclave times and temperatures may differ depending on the type and manufacturer of the autoclave. As a result, it may be unable to meet the maximum number of times. To determine whether the required conditions are met, please consult the user’s manual of the autoclave manufacturer you are using.

The post i600/i700/i700w Scanner Tips appeared first on ISD-Digital.

Undercut Area Analysis
This feature allows you to analyse the undercut area based on insertion direction. You can set the insertion direction via two methods (auto or manual direction).

Automatic Alignment
The i600 scan software automatically finds the occlusion with a simple scan of the bite.

Occlusion Analysis
The occlusion analysis feature quickly controls and displays the interference between the maxilla and mandible and shows the results with the color map.

Lock Area
You can lock the scan area by painting it and locked (coloured) area will not be updated by further scanning. Use this feature to fix retracted gingiva after immediate scanning as it might collapse. You can still trim the locked surface. Deleted locked surface can be re-scanned.

HD Camera
You can take high quality 2D images with 3D model data and share the images with a laboratory.

Medit Link
Medit’s new workflow management and communication software, Medit Link, was developed to enhance your performance. Its integrated Cloud Storage and open data architecture ensures that your clinic’s performance is optimized, while supporting your everyday CAD processes with its real-time workflow management and communication tools. In addition, Medit Link enables you to stay focused on your important tasks by giving you an overview of your current digital processes and associated costs.

The post i600 Laptop Package appeared first on ISD-Digital.

Smart Scan Filtering
Remove unnecessary soft tissue data which is one of the biggest challenges when performing scans.

Medit Ortho Simulation
Help the pAtient visualise potential results of an orthodontic treatment.

Cloud-Based Service
Store all data in the cloud. Work on your original scans, archive your digital impressions and orders, manage your cases wherever you are.

Smart Colour Filtering
Automatically filter the colour out during scanning, reducing the number of artefacts and making retraction easier.

Medit Smile Design
Show the patient their future smile or help them envision braces treatment

Web Viewer & Case Talk
Experience smoother communication, with partners. View scan data on any device and share notes. All data is stored securely.

Margin Line Creation
Choose between allowing the system to automatically generate the margin line for any tooth or create in manually

Denture Scanning
Scan edentulous patients, or the inner surface of the denture. Use wax rims or dentures to perform occlusal alignment.

A.I. Scanbody & Abutment Matching
Abutments and scan bodies are automatically matched and aligned with the scan data. Use this function for downstream work, such as CAD.

Medit Crown Fit
Conduct a modeless crown fitting. The software can reveal where alterations may be needed.

Impression Scanning
Get the data from the hard to scan areas using an impression. Scan it and combine with the intra oral data.

Face Scan
Scan your patient’s face, import 3D face and bone data and align all of these data sets to get a more comprehensive final result.

The post i700 Laptop Package appeared first on ISD-Digital.

Smart Scan Filtering
Remove unnecessary soft tissue data which is one of the biggest challenges when performing scans.

Medit Ortho Simulation
Help the pAtient visualise potential results of an orthodontic treatment.

Cloud-Based Service
Store all data in the cloud. Work on your original scans, archive your digital impressions and orders, manage your cases wherever you are.

Smart Colour Filtering
Automatically filter the colour out during scanning, reducing the number of artefacts and making retraction easier.

Medit Smile Design
Show the patient their future smile or help them envision braces treatment

Web Viewer & Case Talk
Experience smoother communication, with partners. View scan data on any device and share notes. All data is stored securely.

Margin Line Creation
Choose between allowing the system to automatically generate the margin line for any tooth or create in manually

Denture Scanning
Scan edentulous patients, or the inner surface of the denture. Use wax rims or dentures to perform occlusal alignment.

A.I. Scanbody & Abutment Matching
Abutments and scan bodies are automatically matched and aligned with the scan data. Use this function for downstream work, such as CAD.

Medit Crown Fit
Conduct a modeless crown fitting. The software can reveal where alterations may be needed.

Impression Scanning
Get the data from the hard to scan areas using an impression. Scan it and combine with the intra oral data.

Face Scan
Scan your patient’s face, import 3D face and bone data and align all of these data sets to get a more comprehensive final result.

The post i700w Laptop Package appeared first on ISD-Digital.

The post i900 Classic Laptop Package appeared first on ISD-Digital.

The post i900 Laptop Package appeared first on ISD-Digital.

The post i900M Laptop Package appeared first on ISD-Digital.

Product warranty scope
If under normal and proper use a defect or non-conformity appears in the warranted product during the applicable warranty period and the customer promptly notifies the authorised Medit reseller from whom the product was purchased, of such defect or non conformity, and follows the shipping instructions provided for the return of the product, then Medit will : (i) replace the defective handpiece at no charge during the Standard Warranty Duration; or (ii) replace the defective handpiece with a refurbished handpiece at no charge during the Extended Warranty Duration . Medit may repair the defective product instead of replacing it upon the reseller’s request.

Warranty Exclusions
This warranty does not apply to:
– The warranty is not applicable to cases other than defects in material, design, and workmanship.
– Damages caused by abuse or misuse including but not limited to the failure to use the product for its normal purposes or in accordance with Medit’s instructions on usage and maintenance.
– Defects resulting from usage of the product in conjunction with accessories that are not approved by Medit
– Failure of the product arising from incorrect installation or use not consistent with the instructions and technical or safety standards prescribed in the product user manual.
– Accidents, acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any cause beyond the control of Medit.
– Unauthorised modifications were carried out to the product for which the product was not originally designed.
– Damages caused by installation or repair work carried out by persons other than authorised by Medit.
– Damages or failure of the product caused by site (premises where the product is kept) conditions that do not conform to the recommended conditions of the machine.

The post Medit i500 Extended Warranty – 2 Years appeared first on ISD-Digital.